|


9103 Handheld Spectrum Analyzer |
Specifications |
General data
|
Display (TFT)
|
|
Size
|
6.5''
|
|
Brightness
|
300 cd
|
|
Resolution
|
640 x 480, 256 colours
|
|
Measurement result points
|
2 x 501
|
|
Power supply
|
|
DC voltage, external
|
11 to 15 V / max. 28 W
|
|
Changeable Internal battery
|
Li-Ion
|
|
Operating time, battery fully charged, full brightness, TG on
|
2.0 h min.
|
|
Memory
|
|
Type
|
Flash Disk
|
|
Capacity (set-ups and traces)
|
257
|
|
Dimensions (W x H x D)
|
|
|
355 x 190 x 104 [mm] 14.0 x 7.5 x 4.1 [inch]
|
|
Weight
|
|
With battery and Tracking Generator
|
3.6 kg (8 lbs)
|
|
Power supply only
|
0.32 kg (0.7 lbs)
|
|
Environmental conditions (unless otherwise specified)
|
|
MIL-PRF28800F class 2
|
|
Operating temperature
|
0 to +45 °C
|
|
Rel. humidity (non-condensing)
|
80%
|
|
Storage temperature
|
-10 to + 50 °C
|
|
Connectors
|
|
RF in
|
Connector type N (female), impedance 50 ohm
|
|
Serial interface
|
For software updates and remote control Speed 57.6 kbit/s
|
|
LAN (TCP/IP)
|
For software updates and remote control Speed 10 Mbit/s
|
|
Standard deliveries
|
|
9103 Handheld Spectrum Analyzer incl. power supply (90 to 240 V/50 to 60 Hz), serial (RS-232) or crossover Ethernet communication cable, 9100 Data Exchange Software (1 license, user's guide on CD and getting started manual)
|
Frequency
|
Frequency range
|
|
Measurement range
|
100 kHz to 7.5 GHz
|
|
Resolution
|
1 kHz
|
|
Sweep time
|
|
Span > 10 kHz
|
1 ms to 250 s
|
|
Span = 0 Hz
|
1 ms to 250 s
|
|
Resolution bandwidth (RBW)
|
|
RBW (-3 dB) range 100 Hz to 1 MHz (RBW selection manual or automatic)
|
|
Video bandwidth (VBW)
|
|
VBW range (-3 dB) 10 Hz to 1 MHz (VBW selection manual or automatic)
|
|
SSB noise
|
|
< -80 dBc/Hz (f = 5.7 GHz, Δf = 100 kHz, RBW = 10 kHz, VBW = 1 kHz)
|
Amplitude
|
Measurement range
|
|
Averaged noise floor to 20 dBm
|
|
Display units
|
|
dBm, dBµV, dBmV, dBV, dB
|
|
Displayed average noise level (DANL) (RBW = 100 Hz, attenuation = 0 dB)
|
|
10 MHz to 5 GHz
|
< -120 dBm, typ. -123 dBm
|
|
5 to 7.5 GHz
|
< -118 dBm, typ. -120 dBm
|
|
Input attenuation
|
|
Setting range
|
0(10) to 50 dB
|
|
Attenuation steps
|
10 dB
|
|
Dynamic range
|
|
Range
|
> 70 dB
|
|
Max. measurable input level (attenuation = 40 dB)
|
20 dBm
|
|
Min. measurable input level, <4 GHz
|
-119 dBm
|
|
Min. measurable input level, 4 to 7 GHz
|
-120 dBm
|
|
Min. measurable input level, 7 to 7.5 GHz, attenuation = 0 dB
|
-112 dBm
|
|
Level accuracy
|
|
10 to 3600 MHz
|
±1 dB
|
|
3600 to 7500 MHz
|
±1.5 dB typ. 1.0dB
|
|
RF input match (input attenuation = 10 dB)
|
|
VSWR, 100 MHz to 4 GHz
|
< 1.6, typ. 1.3
|
|
VSWR, 4 to 6 GHz
|
< 2.0, typ. 1.6
|
|
VSWR, 6 to 7.5 GHz
|
< 2.3, typ. 2.0
|
|
Spurious response
|
|
Image rejection (f = 6.7 GHz)
|
> 60 dB
|
|
LO leakage (attenuation = 10 dB, f = 7.7 GHz)
|
< -57 dBm
|
|
Spurious level (100 kHz to 3 GHz, attenuation = 0 dB)
|
< -86 dBm
|
|
Spurious level (3 GHz to 7.5 GHz, attenuation = 0 dB)
|
< -80 dBm
|
|
Intermodulation-free range (input level -30 dBm, f1 = 990 MHz, f2 = 992 MHz)
|
> 63 dB
|
Functions
|
Detector & sweep
|
|
Detector types
|
pos./neg. peak, pos. peak, neg. peak, sample
|
|
Sweep processing
|
actual, average, max. hold, min. hold
|
|
Trace
|
|
Max. displayed traces
|
2
|
|
Trace points
|
2 x 501 (Two independent traces are available, min. hold, max. hold at the same time)
|
|
Trace functions
|
A+B → A, A-B → A, trace offset, copy a>b, copy b>a
|
|
Marker
|
|
Max. markers
|
6
|
|
Delta markers
|
5
|
|
Marker functions
|
max. peak, next peak
|
|
Transfer functions
|
M → centre frequency, M → ref. level, M → f step
|
|
Limit check
|
|
Limit functions
|
upper, lower, upper and lower
|
|
Power measurement
|
|
Measurement functions
|
Channel Power, ACPR, OBW
|
|
Default systems
|
GSM, WCDMA, DECT, WLAN
|
|
Demodulation
|
|
AM/FM
|
on marker/permanent/on multi marker
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
February 16, 2011New firmware for 2305 Stabilock adds Autorun capability for base station testing, new option for BS remote control
> more
|
|
|
|
|
February 2, 2011 Aeroflex Introduces New Options for 2201 ProLock Phone Tester to Increase WCDMA Test Speed, Add Handover to GSM and HSDPA Test
> more
|
|
|
|
|
April 20, 2010 New TETRA tester supports service of base stations and radio terminals
> more
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
 |
|
 |
|
|