2201 ProLock

2231 GSM Option

The 2231 GSM Option performs the necessary GSM call processing and measurements on a voice channel or a test (loopback) channel. Measurements include:

• Output power
• Power vs. time
• RMS and peak phase error
• Frequency error
• Burst length
• BER
• Reported RSSI

2232 GPRS Option

The 2232 GPRS Option is an extension of the 2231 GSM Option, adding the necessary protocol for the GPRS Attach and to set up a test channel. The measurements are the same as with the GSM Option, with BLER measurements in addition. Protocol and measurements support data traffic on one timeslot in either the uplink or the downlink.

2233 EDGE Option

The 2233 EDGE Option enables 8PSK transmitter measurements to ensure that the EDGE transmitter functions correctly. For the purpose of the measurements, a data connection is established. The 2231 GSM Option is a prerequisite of the EDGE option.

2234 WCDMA Option

The 2234 WCDMA Option performs the necessary WCDMA call processing and measurements on a voice channel or a test channel (RMC). Measurements include:

• Minimum and maximum output power
• Open loop and inner loop power control
• RMS and peak error vector magnitude
• RMS and peak magnitude error
• RMS and peak phase error
• Frequency error
• Rho
• I/Q offset
• I/Q imbalance
• ACLR
• BER and BLER
• Reported RSCP

2260 Coupling Factor Update License

With tests over the antenna, good power and receiver measurement accuracy is only achieved with the exact knowledge of the antenna coupling factor, which depends on the phone model and the coupling device. Willtek offers an update service of the coupling factors for the latest models. These coupling factors are valid for the antenna connection between the phone and the Willtek 4916 Antenna Coupler installed in a 4921 RF Shield.

The 2260 Coupling Factor Update License is available as an option to the 2201 ProLock running in conjunction with the 2261 Autotest Option. The license enables the ProLock to download actual coupling factors from the Internet. The update service is available for one year and can be renewed.

More than 650 phones have been characterized and are available in the coupling factor database. The factors relate to the combination of 4916 Antenna Coupler with standard or XY Shuttle and 4921 RF Shield.

This option is the equivalent of the 7360 Coupling Factor Update License in Lector, just for the ProLock. It uses the same coupling factor database as Lector to update its internal database.

2261 Autotest Option

The Autotest option allows for complete automated tests without a separate PC, but at similar comfort as with 7310 Lector-Scriptor. The same scripts can be used for Lector and for Autotest on the ProLock. 7315 Scriptor can be used as an administration tool for the Autotest Option. Scriptor offers the possibility to transfer data to the ProLock and to generate and group test scripts with it.

The ProLock with the Autotest option includes different test scripts, both generic as well as manufacturer-specific ones. The latter are designed according to the test procedures defined by leading handset vendors (Nokia, Samsung, Sony Ericsson, HTC and RIM). Semi-skilled personnel can easily run tests and interpret the clear Pass or Fail verdict.